V0 110V Auto Glue Dispenser Solder Paste Digital Display Liquid Control Dropper

Description

Voltage: AC110V
Consumed power: <12W
Air source: Max 0.99MPa
Air output: 0.05MPa--0.99MPa
Dispensing type: Free to set 16 kinds of ways, with dispensing time display
Timer mode dispensing time : 0.01-99.99 seconds
Dispensing time interval: 0.1-9.9S(automatic timing function)
Display：four-bit LED display, can be adjust freely.
Vacuum back-flow function: Negative-pressure control to 600mmHg
Repeated accuracy: +0.01%
Dispensing accuracy：>800time/min
Minium dispensing: 0.0001 ml
Machine size: 235x225x63mm
Machine weight：<3kg
Features:
Dial-up control dispensing quantity and interval time,LED display.
Use 0.18CV constant flow of electromagnetic valve.
Indicator light power switch.
Adjustable vacuum suction 15"/Hg.
Delicate foot switch.
Suitable liquid: adhesion agent, damping oil, epoxy glue, anaerobic adhesive, chemical reagent,
scaling powder,
cubond, organic silicone, adhesive, conductivity silicone, grease, solidification coating agent, solder resist,
printing ink, oil paint, solder paste, cellulose lacquer, dropping liquid, solvent.
Two Kinds of operation：
1.Auto operation: suitable for quantify and timing dispensing.
Put the switch to "auto", adjust the air pressure,dispensing quantity,interval time and the correct
needle tip. Do not need the foot switch.
2. Manual operation: suitable for non-quantify and non-timing dispensing.
Put the switch to "manual", adjust the air pressure,dispensing quantity and the correct needle tip.
Trodding the foot step once then the liquid with drop from needle tip. Leave the foot step then the
dispensing will be stopped.
Package included:
1 Set x Dispenser machine