Set(2) Lock Hub Axle Actuator For Ford F150 Expedition Lincoln Navigator 4WD 4X4

Description

Welcome to our ebay store. Happy shopping
Store Home
New Arrival
Ending Soon
Add to Favourites
View Feedback
Contact us
Store Categories
Brake Rotors & Pads
Complete Suspension
Hub Bearing
Hub Actuator
AC Compressor
Door Handle
Water Pump
Air Filter
Car Meter
Oxygen Sensor
Window Switch
Dolly Tire Straps
Headlight
Carburetor
Leveling Lift Kit
Keychain
Racing Switch
Battery Charger
Door Latch
Accessory
Other
Why Choose us
Free Shipping
Fast Shipping Within 24 hours
30 Day Money Back Guarantee
Trusted Store Satisfaction Guarantee
Secure Shopping With Confidence
Best Price and Good Quality
Professional Customer Service
Set(2) Lock Hub Axle Actuator For Ford F150 Expedition Lincoln Navigator 4WD 4X4
Items Description
Specifications:
Comes as a
PAIR
Fits both LH (Driver Side) & RH (Passenger Side)
FRONT
Replaces dealer part number: 7L1Z-3C247-A, 7L1Z3C247
Direct replacements
Built to strict quality control standards
5 Year Warranty
This item is backed by a Limited 5 Year Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (not excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.
Fits
:
2003-2015 Ford Expedition 4WD
2015 Ford Expedition AWD
2004-2015 Ford F-150 4WD
2008-2012 Ford F-150 AWD
2006-2008 Lincoln Mark LT 4WD
2006-2014 Lincoln Mark LT AWD
2003-2015 Lincoln Navigator 4WD
2005-2015 Lincoln Navigator AWD
Installation Instructions
STEP
1
:
RAISE AND SECURE THE VEHICLE
Raise the vehicle with a jack
Secure the vehicle on jack stands
STEP
2
: REMOVING THE CV AXLE SHAFT
Remove the cap over the hub nut
Pry off the wheel center cap with a flat blade screwdriver
Remove the 13mm hub nut
While holding the tire in place, remove the six twelve-point 12mm bolts from the CV joint
Remove the 30mm bolt from the strut assembly using a breaker bar or ratchet and pipe
Tap the nut with a hammer to loosen it, if necessary
Pry the lower end of the strut assembly from the lower control arm with a pry bar
Pull out the CV shaft
STEP
3
: REMOVING THE FOUR WHEEL DRIVE ACTUATOR
Pry off the actuator with a flat blade screwdriver
Remove the three 8mm bolts from the four wheel drive actuator
Disconnect the vacuum hoses from the actuator
STEP
4
: INSTALLING THE NEW ACTUATOR
Put the actuator into place
Connect the vacuum hoses to the new actuator
Start the three 8mm bolts by hand
Tighten the three 8mm bolts
STEP
5
: REATTACHING THE CV AXLE
Reconnect the strut at the lower contro
l arm
Slide the CV Axle back into place
Push the bolt through where the strut connects to the lower control arm
Attach the nut
Tighten the bolt to between 95-100 foot-pounds of torque
Start the 12-point 12mm bolts into the CV axle by hand
Tighten the bolts preliminarily
Tighten the bolts to 25 foot-pounds in a crossing or star pattern
Reinstall the 13mm nut on the end of the axle
Reinstall the cap over the nut
Reinstall the center cap
Lower the vehicle
Delivery Details
Payment
Terms of Sale
Contact us
About us
Delivery Details
All Items will be shipped to buyer's Paypal confirmed Address.
We only ship to the confirmed address provided by PayPal. Please make sure your address in PayPal matches the shipping address. Please make sure your PayPal address is up-to-date.
All items will be shipped within 24 business hours upon receipt of payment (except Saturday and Sunday).
If you do not receive your item on time, please contact us immediately for further assistance. We will track the shipment and get back to you in 24-48h with a reply.
Payment
We accept payment by PayPal only !
Payment should be completed within 7 days after buyer places the order or else an unpaid case will be opened in order to cancel the transaction. If you can not pay in time, please contact us.
Terms of Sale
Please leave us a good rating after you have received the item and are happy with our transaction.
If there are any issues, please contact me at the first time .We will deal with it in time.
Contact us
If you encounter any problems about anything, please feel free to contact us and we will do our best to assist you solve the issue. If you are not satisfied in anyway, please feel free to let us know and give us a second chance to correct it before you decide to leave any neutral or negative feedback.Thanks!
About us
Sinapi_26 is a professional suppliers in automotive field, we can provide the best products with best quality, 100% customer satisfactory is always our goal.
Our Products are manufactured in ISO 9000 /TS16949 certified facilities. the products deliver the look, feel, fit and performance of OE. Manufactured with an OE design, simple installation and and long life as a guarantee.
Store Home
|
New Arrival
|
Ending Soon
|
Add to Favourites
|
View Feedback
|
Contact us
Copyright © 2020, sinapi_26 All Rights Reserved
On Apr-19-21 at 05:58:51 PDT, seller added the following information: