MAXXEON MXN05200 Workstar LUMINATOR Jr. Commercial Grade Work Light, 1250 Lumens

Description

** Only purchase products from Authorized Distributors to ensure the products autheticity, quality, and performance **
Practical
The WorkStar® 5200 LUMENATOR®Jr is a rechargeable, industrial grade work light that is not only practical, but darn near perfect. The unique hexagon shape combined with the nylon handle allows this area light to be positioned on a variety of surfaces. The rubber bumper around the aluminum body/heatsink protects the edges and provides good surface grip. The nylon handle tilts 180 degrees and acts like a support leg or mounting point. The hole in the handle adds mounting flexibility for the optional accessories: the powerful Neodymium magnetic base, the single-head telescopic tripod and the triple-head telescopic tripod. It can also be used as a permanent or semi-permanent mounting point.
Performance
The On/Off switch cycles through the three brightness settings for easy operation. The High setting provides an intense level 1250 daylight white lumens, with a run time of 2 hr. The Medium setting is a bright 600 lm, with a run time of 5 hr. The Low setting provides a very practical level of 300 lm for 9 hr. This is all made possible by the technologically advanced 10 W COB (Chips On Board) LED and the powerful Li-ion 2200 mAh battery pack, which is user replaceable. Three green LEDs are arranged in a bar graph format to indicate both the battery life and the charge level. The superior brightness levels are only part of the story; the beam pattern is important as well. The COB LEDs plus the unique "fresnel-like" lens creates an ultra wide floodlight beam - no rings, no shadows, no hot spots. The diameter to distance ratio is about 3:1, meaning for example, the beam diameter is about 9 ft wide when the light is 3 ft from an object. This industrial grade work light can light up a whole room, an engine bay, or a campsite, you name it. It is flexible, versatile and tough.
Professional
The LUMENATOR®Jr is a professional, commercial grade work light that is ready for hard work. It is only 7 x 6.5 x 2 inches and weighs in at 1.5 lb. It stores easily in the center console of your pick-up truck or in a small tool box. It is rated for an operational temperature range from 15º to 105ºF. It has ingress protection rating of IP65, which means it is dust tight and water resistant to rain and
accidental
submersion. It has an impact test rating of IK07, which means it can absorb 2 J of energy and it has a drop test rating of 6 ft, ensuring a long, trouble-free life.
PARAMETER
PERFORMANCE
LED Brightness (Luminous Flux)
High: 1250 lumens, Medium: 600 lumens, Low: 300 lumens
Power, Color
10 W COB (chips on board), CRI > 80, Daylight White, 5700K
Heat sink
LED is mounted in a sealed aluminum heat sink assembly, which protects the LED from dirt and fluids
Power/Brightness Switch
Sealed power switch controls the 3 brightness levels: LOW-MEDIUM-HIGH-OFF...
Beam Ratio
The COB LEDs plus the unique glass lens creates an ultra wide floodlight beam - no rings, no shadows, no hot spots. The beam diameter to distance ratio is about 3:1, meaning for example, the beam diameter is about 6 ft wide when the light is 2 ft from an object.
Batteries Included
Li-ion 11.1 volt, 2.2 Ah battery pack. Pack is user replaceable
Run Time
High: 2 hours, Medium: 5 hours, Low: 9 hours
Recharge Time
3 hours
Regulator Circuit
High efficiency constant current circuit to maximize brightness and runtime
Battery Life and Charge Indicator
Three green LEDs are arranged in a bar graph format to indicate both the battery life and the charge level
Wall Power Supply/Charger
Input: 100-220 VAC, 50/60 Hz UL-Approved North American power supply with standard "Type A", two prong plug. Output: 15 VDC, 1 A. Use only the supplied the MXN10133 Power Supply. The LUMENATOR®Jr is not compatible with the original LUMENATOR® MXN10080 Li-ion Charger.
Operate While Charging?
Q: Is it is safe to operate the light while charging?
A: Yes
Body
Aluminum with rubber edge protector
Handle
The sturdy nylon handle rotates 180° to adjust the light angle and it is the mounting point for optional tripod stand and magnetic base
Dimensions
7 x 6.5 x 2 inches (18 x 17 x 5 cm)
Weight
1.5 lb (0.7 kg)
Temperature
15º to 105ºF (-10º to +40ºC)
Ingress Protection
IP65 = dust tight + waterproof to water jets and rain
Impact Test
IK07 = 2 J
Drop Test
6 ft (2 m)
Included
WorkStar® 5200, a user replaceable 11.1 VDC, 2.2 Ah Li-ion battery pack and a 100-240 VAC, 50/60 Hz, 15 VDC, 1 A UL-approved power supply
Warranty
1 year against manufacturing defects
Prop 65
Complies with California Proposition 65