-40%

Cree XPG3 Positive Earth LED 5W for Milwaukee 18V Power-Plus FLEXHEAD 50-24-0175

$ 7.91

Availability: 31 in stock
  • Brand: Cree
  • California Prop 65 Warning: WARNING: This product can expose you to chemicals, including lead, which is known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information visit https://www.p65warnings.ca.gov/
  • Style: Work Light
  • Lumens: 320 LUMEN
  • MPN: PR-5W-30VAC-8
  • Voltage: 18V
  • Condition: New
  • Model: XPG3
  • Lighting Technology: LED
  • Item must be returned within: 30 Days
  • Refund will be given as: Money back or replacement (buyer's choice)
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Seller
  • Lightbulb Type: LED for Milwaukee 50-24-0175
  • Voltage Polarity: Reversed Polarity
  • Type: LED

    Description

    Cree (Reversed Polarity) LED 5 Watt Bulb FOR 18V Milwaukee Tool Light Flashlight Lantern
    Note: This LED is not For other Milwaukee Tool Lights
    Use this
    3
    20
    LUMEN
    LED PR Bulb to upgrade standard P13.5S bulb lights
    for superior brightness, efficiency, and longevity
    for Less ---
    LED UPGRADE For the Following
    Rechargeable Work lights and Replacement Bulbs:
    Work Light Upgrade For:
    Bulbs Upgrade For:
    Milwaukee
    50-24-0175
    18V
    Milwaukee
    18V
    * Milwaukee® is registered trademarks of
    Milwaukee Electric Tool Corporation
    * EPISTAR is a trademark of EPISTAR Corporation
    * CREE is a trademark of Cree, Inc.
    * Draco Products is not affiliated with Milwaukee Electric Tool Corporation, Epistar Corporation or Cree, Inc.
    Simply replace your existing bulb with this LED – no modifications necessary!
    *Please note:
    A new LED will not fix a
    broken
    tool light that does not work with a regular bulb.
    LED bulb will be bright but not as bright as highest power Krypton or Xenon bulb over 10 watts.
    ----- LEDs do not work in  the following Milwaukee
    Series Flashlights  ---------
    Note: LEDs
    will NOT work
    in the following Milwaukee
    49-24-0165 V18,
    14-46-1800, 14-46-1825, and 49-24-0155
    Series Flashlights
    Universal Voltage Works (NEG) 5 Volt to (NEG) 30 Volts
    Reversed
    or Standard
    Polarity (-) or (+) on bottom contact and (+) or (-) on Flange !
    Minimizes battery and bulb replacement waste
    Focusability of flashlight is preserved with these point source LEDs
    Brighter Light for improved vision for
    enhanced visibility of fine detail
    Longer battery life from high efficiency LED
    Long lamp life 50,000 hours of continuous use
    Dependable and shock resistant
    Easy To Install
    Features:
    INTENSE BRIGHT LIGHT
    output comes from the ultra-efficient LED. The LED does not fade when it gets hot, so its light output is stable even after extended run times.
    FOCUSABILITY
    These LED Point source lights preserve one of the most outstanding features of many flashlights, the ability to focus. A focused beam that throws a bright beam a very long distance.
    MAXIMUM EFFICIENCY
    These
    LEDs are powered below their maximum rating for longer life and higher lumens per watt of battery power.
    LONGER BATTERY LIFE
    results from the higher efficiency of the LED compared to the standard incandescent bulb 10 Lumens / watt. These LED maintain a brighter white light output as the batteries discharge than incandescent bulbs which turn to an amber light.
    INDESTRUCTIBLE LED
    performance and lifetime operation. Unlike incandescent bulbs with a thin fragile filament that breaks, LEDs wear out very slowly. This is likely to be the last bulb you will ever need to buy. The rated lifetime is 50,000 hours.
    EASY TO INSTALL
    as if just replaces your existing bulbs - no modifications necessary
    Standard PR Incandescent vs. LED
    See the difference!
    1) Warning! - Do not look directly into lit LED Lamps at a close distance or shine into eyes, as they are extremely bright and could cause eye damage.
    2) Warning! - For safety always follow manufactures safety and operational instructions.
    3) Caution! - Remove batteries, turn-off or disconnect power before changing bulb.
    * The perfect bulb (High Brightness and Longer Battery life run time).
    Upgrade / Replacement for standard Work Light applications that take a flange base light bulb for 9-30
    Volt battery operated products (Zink, Alkaline,  lithium, NiCad).
    *EPISTAR is a trademark of EPISTAR Corporation
    *CREE is a trademark of Cree, Inc.
    * Draco Products is not affiliated with Epistar Corporation or Cree, Inc.

    ·
    Buy two now and save with discounted shipping,
    the r
    ight bulb is hard to find, why not get two?
    This is a very popular style of bulb for Many Work Lights, flash lights, and work lights
    Reversed Polarity
    LED with bottom contact Negative!
    *Specifications are accurate for this Miniature LED Bulb.
    Applications for this standard Flange type bulb are too numerous to list so purchaser is responsible for compatibility with their actual product.
    The Lamp has a 'PR' Base - P13.5s is International standard flanged base
    , 9.2mm Diameter, with flange "V" notc
    h

    Thank You.
    Please return a positive review for good service, Thank You.
    © 2015-2021 Draco Products. All Rights Reserved