-40%

Complete CNG Fueling station 250 SCFM 125HP, 3-pack storage, dispenser, controls

$ 132000

Availability: 21 in stock
  • All returns accepted: ReturnsNotAccepted
  • Brand: Greenfield / Atlas Copco
  • Condition: 2009 MODEL WITH ONLY 1,461 HOURS! Used, Operational Serviced and operational as of July 2020

    Description

    The station was fully operational as of July 2020. It properly dismentled due to Cng program discontinue.
    Station Type
    Greenfield compressor, skid mounted, enclosed, sound-attenuated.
    Install Date / Hours
    2009/
    1,461 hrs
    Inlet
    2-inch 140 psig system.
    Automatic inlet shutoff valve located inside compressor building on skid.
    ESD (emergency shutdown) located on control panel mounted on compressor.
    Manual inlet valve located approximately 93 feet from corner of motor control center. Valve box painted red, valve T-handle is located on control building.
    Gas Dryer
    Pneumatic Products Corp., Model #FA-40 single tower, equipped with pre- and post-filters, non-regeneration.
    Compressor
    Greenfield ; Atlas Copco ; Prattlen Schweiz
    Model : C3U209GP
    Serial: NGV0357
    Electric Drive Motor
    125 HP Electric Drive Motor: 460V, 156A, RPM: 1230
    Capacity: 250 SCFM at 100 PSI Suction Pressure
    Inlet Pressure: 80-115 PSI
    Discharge Pressure: Up to 4500 PSI
    Prime Mover
    Siemens Prime Mover electric motor, 125 HP, soft start, 3 phase, 480 volts Explosion proof, Model #PE-21 Plus
    Operating speed: 1775 rpm
    Start Amps: 175
    Run Amps: 87
    Fuel Storage
    3-pack ASME cylinders, rated to 5500 psi. 24 foot long ( 23 foot
    vessels)
    Pressure relief valves on all cylinders Anderson Greenwood, Part #83CM68-6. 5471, set pressure relieving capacity 9926 CFM. ¾” inlet and 1” outlet.
    Vessels are in great shape. PRDs are up to date.
    Station Controls
    Greenfield Compression Controls programmable. Located in Control Room, Motor Control Center.
    Dispensers
    1 Greenfield dispenser - 2-sided 3600 psi
    Alarms
    Emergency shutdown and trouble code alarm go to AVSG/CUC via Sensophone dialup.
    There are five (5) ESD (emergency shutdown buttons):
    One ESD located on compressor skid.
    One ESD located on station control panel in MCC room.