CAPUF ESP32 Programmer

Description

ESP Prog is ESP32 Programmer board.
It can be used in multiple ways like use it for programming ESP8266, ESP32, or any other microcontroller which needs boot Pin and Reset Pin control along with UART RX, and TX for flashing the MCU with a new program.
Or, one can also use it as a USB to UART adapter. FEATURES Compact size: 50mmx30mm USB-C Type Interface: you can connect a USB in any direction. Use USB-A to USB-C Cable. LEDs for Power, RX, TX Switch for Reset and Boot Both 3.3V and 5V are available on the O/P connector All signals on a standard 2.54mm Pitch Header (Header will come along with the board (unsoldered)) ESP PROG PINOUT 3.3V DC (100mA Max.) TXD RXD GND Reset/RTS Boot/DTR GND 5V DC (500mA Max.)