150 GPH CENTRIFUGE w/BRASS and GAUGE for Black Diesel

Description

150 GPH CENTRIFUGE w/BRASS and GAUGE
If you're thinking of driving on Waste Vegetable Oil, Waste Motor Oil, Transmission Fluid or any other alternative fuel , visit our Forum Library. We have gathered over 35+ forums in one place dealing with oil filtration and specific vehicles.
See videos
at Centrifuge for Dummies
The
wvo centrifuge
has the ability to clean your oil to below .5 micron while dewatering.
Specifications
WVO
centrifuge
comes with pressure gauge, 3/8" ball valve, 2 - 3/8" brass tees, 2 - 3/8" brass hose barbs, and 3/8" close nipple.
The flow rate capacity of the
centrifuge
for WVO is 2.5 GPM or 150 gallons per hour. The oil cleaning centrifuge measures 6.5" in diameter by 10.5" tall. Rotor is capable of holding 42 oz. of contaminants. One 55 gallon drum of waste vegetable oil will take approximately 20 minutes to process. The viscosity is the critical part of this equation. Oil centrifuge
generates (at 85 PSI) a centrifugal force 2,000 times greater than gravity at 6400 RPM. You need to purchase a 1/2 HP motor with pump for wvo centrifuge operation. The oil centrifuge will filter waste vegetable oil, filter used motor oil, filter hydraulic oil, filter gear oil or dewater biodiesel. The wvo centrifuge will remove magnesol with more than one pass necessary. At the end of the process, you can also remove glycerin, which requires no heating. More than one pass may be needed. You can build a WVO centrifuge filtration unit with this oil centrifuge
All internal centrifuge parts certified nickel plated to prevent rust and corrosion.
Every product is warranted to the original purchaser to be free from defects in material and workmanship for a period of five years.
Bushings and shaft wear are not covered under this warranty
Call for INTERNATIONAL SHIPPING
We are not responsible for international custom or VAT charges.
For all your oil filtration
needs visit us at
Pa Biodiesel Supply